AUDIO LAB AMPLIFIER ( No fuss, no frills. Just pure engineering excellence for an impeccable user experience – that’s the Audiolab 8200A, in a nutshell.)

    Audiolab’s latest integrated amp is the result of elegant, unfussy engineering of the highest quality. Clean lines and firm, responsive controls ensure it is a pleasure to use, while the amp’s internal design delivers exceptional sound: fast, clean and detailed, a performance perfectly in balance from deep bass to soaring treble.

       The 8200A delivers 60W per channel and supplies six line-level inputs and three outputs. Twin sets of speaker terminals are provided to facilitate bi-wiring, along with a high-quality, front-mounted headphone output, while a top-grade ALPS motorised volume control and motorised input switches deliver the convenience of remote control without any loss of performance.
       No fuss, no frills. Just pure engineering excellence for an impeccable user experience – that’s the Audiolab 8200A, in a nutshel



POWER AMPLIFIER

    The 8200P is a classic Audiolab two-channel power amplifier, with a sound as clean and crisp as its minimalist exterior. Its pedigree is impeccable, descended from a range of amplifiers revered throughout the world for their unerring ability to perform at the highest level.
       Delivering more than 100W per channel with a peak output of over 40 Amps, the 8200P is capable of driving even the toughest of loudspeakers with sure-footed authority, combining Audiolab’s class-leading neutrality with an unerring ability to engage the listener throughout a musical performance.
When listening to the 8200P, what you hear is the music – pure and unadulterated, with detail and dynamic range fully intact.
       Exemplary build quality and reliability ensure that this is a power amp for all seasons, as comfortable in a home cinema environment as it is in a purist two-channel music system. Thrilling to listen to and utterly dependable, the 8200P is a genuine audio thoroughbred.

Specification

General Description:	Stereo Power Amplifier
Output Power:	2 x 100W RMS 8 ohms 2 x 150W RMS 4 ohms
Frequency Response:	20 Hz-20 kHz ±0.3 dB 0.1Hz-75 kHz -3 dB.
Gain:	29.0 dB at1kHz
Total Harmonic Distortion:	Less than 0.05%
Signal to Noise Ratio:	Better than 95 dB
Input Sensitivity (RCA):	1V rms for 100W into 8
Input Impedance (RCA):	50kΩ
Power Consumption:	500 VA
Dimensions (W x H x D):	445×74×337mm- including feet, terminals and controls
Weight:	Net: 8.7 kg Shipping: 10 kg
Finish:	Silver/Black

AUDIOLAB MONOBLOCK

clean-sheet addition to the Audiolab range, the 8200MB is an advanced single-channel power amplifier capable of partnering loudspeakers of the highest calibre. With a rating of 250W, it is designed to deliver high power with ultra-low distortion.

       In terms of sound quality, the 8200MB is an exceptional performer. Its high current ability enables it to drive the toughest of loads; even the most difficult speakers are driven cleanly without the loss of dynamics. The supreme neutrality that characterises Audiolab hi-fi components shines through, coupled to effortless reserves of current to call upon whenever required, so all you hear is the music – pure and unrestrained.
       Supplying a choice of both balanced XLR and single-ended RCA inputs, the 8200MB is a power amplifier of enormous ability. Anyone seeking a flexible, compact, high-power monoblock for a stereo or multichannel system need look no further.

Specification

Rated Output Power:	250W/Channel into 8Ω, 2OHz-20kHz
Input Sensitivity:	1.63Vrms for 250W into 8Ω
Input Impedance:	20kΩ Balanced, 16kΩ unbalanced
Gain:	29.0 dB at 1 kHz; Signal To Noise Ratio (IHF, rel. 0.dBW); 88dB
Frequency Response:	20-20KHz±0.1dB, <0.1-120KHz-3dB
Total Harmonic Distortion & Noise:	Less than 0.03%, 20Hz-20 kHz
Polarity (Phase):	Non-Inverting
Muting:	Muting controlled automatically
Operating Temperature Range:	10-35℃
Power Requirements (Depending on Region):	50-60Hz 100V, 110-120V, and 220-230V models available Maximum Power Consumption: 380VA
Dimensions (WxHxD):	216x150x379mm
Weight:	Net: 9kg Shipping: 11kg

MULTI STEREO POWER AMPLIFIER

The 8200X7 is a 7-channel power amplifier perfect for those who want a ‘dual-role’ amplifier for both movies and high fidelity music with high-end performance. And similar to its siblings, the 8200X7 is capable of seamless integration with any Audiolab power amplifier.

Specification

Description	7- Channel Power Amplifier
Rated Output Power	7 x 100W (8Ω) or 5 x 100W and 1 x 150W (8Ω) or 3 x 100W and 2 x 150W (8Ω)
Frequency Response Gain	1.5Hz - 150kHz (-3dB) 28.8dB
Total Harmonic Distortion	N/A
Signal-to-Noise Ratio	> 90dB
Input Sensitivity	1.05V RMS
Impedance	47kΩ
Dimensions (W x H x D)	448 x 132 x 340mm
Net Weight	18.2kg
Finish	Silver/Black
Standard Accessories	Power cord

STEREO PREAMPLIFIER

   Superlative digital media centre featuring 32-bit digital-to-analogue converter/pre-amplifier
       fully balanced discrete Class-A analogue circuits, a dedicated USB input of asynchronous processing, digital filtering, ample digital and analogue input connections and Class-A headphone amplifier. Comprised of over 1700 components using precision SMT manufacturing
       on a 4-layer PCB, the Audiolab 8200DQ is the most advanced electronic design in Audiolab’s impressive history.

Specification

Description	Digital & Analogue Pre-amplifier
DAC	ESS Sabre32 9018 chip
Resolution	32 bits
Output Voltage	RCA: 2.05V RMS (±0.1dB) XLR: 4.1V RMS (±0.1dB)
Frequency Response	20Hz - 20kHz (±0.2dB)
Total Harmonic Distortion	RCA: < 0.0025%, XLR: < 0.0008%
Crosstalk	RCA: < -120dB, XLR: < -130dB
Dynamic Range	RCA: > 98dB, XLR: > 100dB
Dimensions (W x H x D)	445 x 74 x 335mm
Standard Accessories	Remote control handset, power cord

www.nicche.electronics@gmail.com